H3C Technologies H3C Intelligent Management Center - Manual (Page 308)

290
{
Configure Type—Select the type of device configuration that can be deployed to the access
device. Options are H3C Wired, H3C Wireless, and HP Wired.
{
Device IPv6—Enter a complete IPv6 address or an IPv6 address in compressed format.
{
Remarks—Enter the remarks of the access device. UAM supports fuzzy matching for this field.
For example, if you enter lab, all access devices that contain lab in the remarks are queried.
Empty fields are ignored.
4. Click Query to perform the query. The access device list shows all access devices that match the
query criteria.
5. Click Reset to clear the query criteria. The access device list page shows all access devices in
UAM.
Viewing access device details
You can view detailed information about an access device only after it is added to the IMC platform.
To view detailed information about an access device:
1. Access the access device list page.
Click the name of the access device whose detailed information you want to view.
The Access Device Details page appears.
For more information, see HP Intelligent Management Center v7.0 Enterprise and Standard
Platform Administrator Guide.
Viewing the access device configuration
1. Access the access device list page.
2. Click the Details icon for the access device whose configuration you want to view.
The Access Device Configuration Details page appears.
Access Device Configuration Details
{
Device Name—Device label. If the access device is managed by the IMC platform, this field is
the same as the Device Label parameter on the IMC platform. If the access device is manually
added to UAM without being managed by the IMC platform, this field is empty.
{
Device IP—IPv4 or IPv6 address of the access device. If the access device is managed by the
IMC platform, this field displays the management IP address of the device. If the access device
is manually added to UAM without being managed by the IMC platform, this field displays the
IP address manually entered.
{
Access Device Group—Access device group to which the access device belongs. For more
information, see "
Configuring access device groups ."
{
Authentication Port—Port to which UAM listens for RADIUS authentication packets. The value
must be the same as what is configured on the access device in the CLI.
{
Accounting Port—Port to which UAM listens for RADIUS accounting packets. The value must be
the same as what is configured on the access device in the CLI.
{
Service Type—Type of services supported by the access device. Valid service types can be LAN
Access Service, which is used by users for network access, and Device Management Service,
which is used by administrators for device management.