H3C Technologies H3C Intelligent Management Center - Manual (Page 218)

200
The validity period of the previous guests is also affected by the Default validity period of
guests parameter of the guest policy assigned to them. If the two parameters use different
values, the parameter with the smaller value applies to the guests.
6. Select Send Approval Notification via SMS, Send Approval Notification via Email, or both for
Approval Notification Types.
7. Click OK.
The Operation Result page appears, showing the number of guest managers successfully modified
and the number of failures. If failures exist, click Download to download or view the failure reasons
in the operation log.
8. Click Back to return to the guest manager list page.
Deleting guest managers
Deleting a guest manager does not delete the access user corresponding to the guest manager.
Deleting a guest manager does not delete the guests that are managed by the guest manager.
To delete one or more guest managers:
1. Access the guest manager list page.
2. Select one or more guest managers you want to delete.
3. Click Delete.
A confirmation dialog box appears.
4. Click OK.
The Operation Result page appears, showing the number of guest managers successfully deleted
and the number of failures. If failures exist, click Download to download or view the failure reasons
in the operation log.
5. Click Back to return to the guest manager list page.
Specifying the default guest manager
When guest auto-registration is enabled, UAM automatically uses the default guest manager to manage
all guest accounts that are automatically registered.
On the guest manager list, click No in the Default Guest Manager column to configure a guest manager
as the auto-registration guest manager. This operation also cancels the previous default guest manager
at the same time.
The Default Guest Manager column appears only when guest auto-registration is enabled. The column
does not change immediately after the guest auto-registration setting is modified. To view the latest guest
manager list, relog in to IMC.
Configuring guest services in UAM
A guest service is dedicated to guests. You do not need to add guest services.
You can configure existing services in UAM as guest services. However, if a service's Allocate IP
parameter in one or more access policies is configured as Yes, then the service cannot be configured as
a guest service.
Accessing the guest service list page
1. Click the User tab.
2. Select Guest > Guest Services from the navigation tree.