H3C Technologies H3C Intelligent Management Center - Manual (Page 292)

274
− Mail Server Address—Domain name or IP address of the outgoing mail server.
− Port—Port used by the outgoing mail server to send mails.
− Username—Username used by the iOS/OS X endpoint to access the outgoing mail server.
− Authentication Type—User authentication method used by the outgoing mail server. The
value can be None, Password, MD5 Password Response, NTML, or HTTP MD5 Digest.
− Use the same password to send and receive mails—Whether or not to use the same
password for receiving and sending mails.
− Synchronize Most Recent Addresses—Whether or not to use iCloud to synchronize and
share the most recent addresses with other devices.
− Send by Email Only—Whether or not to allow mails of this account to be sent only by using
the iOS/OS X Mail app.
− SSL Authentication—Whether or not SSL is used to secure communication between the
iOS/OS X endpoint and the outgoing mail server.
{
VPN Configuration
− Connection Name—Connection name to be displayed on the iOS/OS X endpoint.
− Connection Type—Connection type of the VPN. The value can be L2TP, PPTP, or IPSec
(Cisco).
− Server Domain Name or IP—Domain name or IP address of the VPN server.
− Account Name—Account name used for VPN authentication.
− Account Authentication Method—Method used to authenticate the account: Password or
RSA SecureID. This parameter does not appear if the VPN connection type is IPSec (Cisco).
− Send All Traffic—Whether or not to send all traffic of the iOS/OS X endpoint through the
VPN connection. This parameter does not appear if the VPN connection type is IPSec
(Cisco).
− Encryption Level—Encryption level of the VPN connection. The value can be None,
Automatic, or Maximum (128 Bits). This parameter appears only when the VPN connection
type is PPTP.
− Group Name—Group name of the VPN connection. This parameter appears only when the
VPN connection type is IPSec (Cisco).
− Use Hybrid Authentication—Whether or not to use hybrid authentication for the VPN
connection. Hybrid authentication involves various factors, including the shared key, group
name, and certificate. This parameter appears only when the VPN connection type is IPSec
(Cisco).
− Password Prompt on Endpoint—Whether or not to prompt the user to enter the password on
the endpoint. This parameter appears only when the VPN connection type is IPSec (Cisco).
− Use Proxy—Whether or not to use proxy settings. The value can be No Proxy, Manual, or
Automatic.
− Proxy Server's URL—UR L of the proxy server. This parameter appears only when the Use
Proxy field is set to Automatic.
− Proxy Server—IP address of the proxy server. This parameter appears only when the Use
Proxy field is set to Manual.
− Proxy Server Port—Port used by the proxy server. This parameter appears only when the
Use Proxy field is set to Manual.