H3C Technologies H3C Intelligent Management Center - Manual (Page 429)

411
Adding an RSA authentication item
1. Access the RSA authentication configuration list page.
2. Click Add in the Roaming Configuration area. Configure the following parameters in the Add
Roam Configuration page:
{
Identifier—Select RSA from the list.
{
IP Address—Enter the IPv4 address of the RSA server.
{
Port—Enter the port number to which the RSA server listens for authentication packets. Enter the
same value as that of the listening port configured on the RSA server.
{
Key—Enter the key that is used for the UAM and RSA servers to authenticate each other. Enter
the same value as that configured on the RSA server.
{
Confirm Key—Enter the same key as the value in the Key field.
{
Type—Select Authentication from the list.
3. Click OK.
Modifying an RSA authentication item
1. Access the RSA authentication configuration list page.
2. Click the Modify icon for an RSA authentication item.
3. Modify the following parameters for the RSA authentication item:
{
Identifier—Select RSA from the list.
{
IP Address—Enter the IPv4 address of the RSA server.
{
Port—Enter the port number to which the RSA server listens for authentication packets. Enter the
same value as that of the listening port configured on the RSA server.
{
Key—Enter the key that is used for the UAM and RSA servers to authenticate each other. Enter
the same value as that configured on the RSA server.
{
Confirm Key—Enter the same key as the value in the Key field.
{
Type—Select Authentication from the list.
4. Click OK.
Deleting an RSA authentication item
1. Access the RSA authentication configuration list page.
2. Click the Delete icon for an RSA authentication item.
A confirmation dialog box appears.
3. Click OK.