H3C Technologies H3C Intelligent Management Center - Manual (Page 524)

506
Deleting devices from an access service topology
The delete operation deletes a device from the access service topology view, but does not delete it from
IMC, and does not delete it from UAM if the device is an access device.
To delete a device:
1. Access the access service topology view from which you want to delete devices.
2. Select the target devices.
3. Click Delete.
A confirmation dialog box appears.
4. Click OK.
Managing devices on an access service topology
Perform this task to set the unmanaged devices in IMC to managed status, and IMC manages the device
basic information, alarm information, and performance indexes.
To manage a device:
1. Access the access service topology view for which you want to manage devices.
2. Select the target devices in Unmanaged state.
3. Click Manage.
Unmanaging devices on an access service topology
Perform this task to set the managed devices in IMC to unmanaged state.
To unmanage a device:
1. Access the access service topology view for which you want to unmanage devices.
2. Select the target devices in Managed state.
3. Click Unmanage.
Synchronizing a device on an access service topology
Synchronizing a device is reading the device information and saving the information to IMC.
Unmanaged devices cannot be synchronized.
To synchronize devices:
1. Access the access service topology view for which you want to synchronize devices.
2. Select the target devices.
3. Click Synchronize to synchronize the device data. Synchronizing device data takes time. After the
synchronization is complete, the latest device data displays in the access service topology view.
Accessing an access service topology
To access an access service topology, you can use either of the following methods: