H3C Technologies H3C Intelligent Management Center - Manual (Page 558)

540
at 04:00 a.m. on 2011-08-17, and the data collected until 00:00 on the day that the report was
generated displays in the report.
• If you select the Monthly schedule type, reports of the previous month are generated every month.
For example, if you set the report start time to 2011-08-10, the first monthly report is generated at
04:00 a.m. on 2011-09-10, and the data collected until 00:00 on the day that the report was
generated displays in the report.
• If you select the Quarterly schedule type, reports of the previous three months are generated every
three months. For example, if you set the report start time to 2011-08-10, the first quarterly report is
generated at 04:00 a.m. on 2011-11-10, and the data collected until 00:00 on the day that the
report was generated displays in the report.
• If you select the Half Yearly schedule type, reports of the last half year are generated every half year.
For example, if you set the report start time to 2011-08-10, the first half yearly report is generated at
04:00 a.m. on 2012-02-10, and the data collected until 00:00 on the day that the report was
generated displays in the report.
• If you select the Yearly schedule type, reports of the last year are generated every year. For example,
if you set the report start time to 2011-08-10, the first yearly report is generated at 04:00 a.m. on
2012-08-10, and the data collected until 00:00 on the day that the report was generated displays
in the report.
6. Set the time at which a report becomes invalid (optional). Then, UAM does not generate any
scheduled report.
{
Select the End by box, and enter an end date and time in the format of YYYY-MM-DD hh:mm.
{
Or click the Calendar icon to select an end date and then enter an end time at the lower part.
7. Set the report file format: select a file format from the Report File Format list. These options are
available: PDF, CSV, MS Excel, and MS Excel (Data-only).
8. Send a report by Email (optional):
Select the Send by Email box, and enter the Email address of the receiver. Reports can be sent to
only one Email address.
9. Click OK.
Viewing service usage reports that have been generated
1. Click the Report tab. Select Scheduled Reports > All Scheduled Reports from the navigation tree to
enter the All Scheduled Reports page.
2. Click the History Report icon of the target service report to enter the History Report page.
3. Click the View link to open a service usage report, or save the service usage report.