H3C Technologies H3C Intelligent Management Center - Manual (Page 95)

77
2. Click Add to add an access policy. As shown in Figure 73 , select EAP certificate authentication for
the service, and select a certificate type.
For other configuration for the service, see "
Configuring access policies ."
Figure 73 Entering the access policy configuration page
Configuring the access device
No specific configuration is required on the access device. However, the access device must support
portal EAP authentication. Whether your access device support the portal EAP authentication feature,
see the portal configuration guide for the device.
Configuring the iNode client
1. Import the root certificate and client certificate to the PC installed with the iNode client.
2. When creating the portal authentication connection on the iNode client, enable certificate
authentication and select the right client certificate.
3. On the portal connection basic attributes page, select the Enable advanced authentication box
and then select the Certificate authentication option, as shown in
Figure 74 .