H3C Technologies H3C Intelligent Management Center - Manual (Page 495)

477
{
Device NAT IP Address—If the access device and UAM had a NAT device in between, this field
displays the target IPv4 address range used by the NAT for the access device. If not, this field
displays the actual IP address of the access device.
{
Client Version—Version of the iNode client used by the user.
{
Details—Click the Details icon to view record details.
Performing a basic query for roaming access detail records
1. Access the roaming access details list page.
2. Click the Basic Query link at the upper right of the page.
If Advanced Query is at the upper right of the page, you are already in basic query mode. Skip this
step.
3. In the Query Roaming Access Details area, set a time range to match roaming users that passed the
authentication within this specific time range.
Enter a time range or click the Calendar icon to select one. The date and time setting takes the
format YYYY-MM-DD hh:mm.
4. Click Query.
The roaming access details list displays all roaming-access detail records that match the query
criteria.
5. To clear the query criteria, click Reset.
The roaming access details list displays the roaming-access detail records for the last seven days.
Performing an advanced query for roaming access detail records
1. Access the roaming access details list page.
2. Click the Advanced Query link at the upper right of the page.
If Basic Query is at the upper right of the page, you are already in advanced query mode. Skip this
step.
3. In the Query Roaming Access Details area, enter or select one or more of the following query
criteria:
{
Login Name—Enter a login name string that the access device sent to UAM. UAM supports
fuzzy matching for this field. For example, if you enter x, all roaming-access detail records for
the login names containing x are matched.
{
Access Duration—Enter an access duration. UAM supports only exact match for this field.
{
Device IP Address Range From/To—Enter an access IP address range for access devices. Enter
a complete IPv4 address in each field.
{
Device NAT IP Address Range From/To—Enter a range of NAT translated IPv4 addresses for
access devices. Enter a complete IPv4 address in each field. This criterion is useful when the
access device and UAM had a NAT device in between.
{
User IP Address Range From/To—Enter an IPv4 address range to match roaming users. Enter a
complete IPv4 address in each field.
{
Access Start Time From/To—Set a time range to match authentications passed within this time
range. Enter a time range or click the Calendar icon to select one. The date and time settings
take the format YYYY-MM-DD hh:mm.
{
User MAC Address—Enter a MAC address string to match roaming users. The MAC address
takes the format XXXX-XXXX-XXXX, XX-XX-XX-XX-XX-XX, or XX:XX:XX:XX:XX:XX. UAM supports