H3C Technologies H3C Intelligent Management Center - Manual (Page 129)

111
Modifying an SSID group
1. Access the SSID group list page.
2. Click the Modify icon for the SSID group you want to modify.
The page for modifying the SSID group appears.
3. Modify the SSID group parameters except Service Group, which cannot be modified.
For more information about the parameter description, see "
Adding an access device group ."
4. Click OK.
Deleting an SSID group
An SSID group cannot be deleted when it is used in an access scenario.
To delete an SSID group:
1. Access the SSID group list page.
2. Click the Delete icon for the SSID group you want to delete.
A confirmation dialog box appears.
3. Click OK.
Configuring endpoint IP groups
An endpoint IP group is a collection of IP addresses. Endpoint users match different access conditions if
the IP addresses of the endpoints belong to two or more endpoint IP groups. UAM supports both IPv4
and IPv6 endpoint IP groups, but you cannot configure IPv4 and IPv6 addresses for the same endpoint
IP group.
Accessing the endpoint IP group list page
1. Click the User tab.
2. Select User Access Policy > Access Condition > Endpoint IP Group from the navigation tree.
The list includes all endpoint IP groups.
Endpoint IP group list contents
{
Endpoint IP Group Name—Name of the endpoint IP group, which must be unique in UAM. Click
the name to display the endpoint IP group details page.
{
Service Group—Service group to which the endpoint IP group belongs.
{
Start IP/End IP—Start and end IP addresses (IPv4 or IPv6 addresses) of endpoints in the
endpoint IP group.
{
Modify—Click the Modify icon to modify the endpoint IP group.
{
Delete—Click the Delete icon to delete the endpoint IP group.
Querying endpoint IP groups
1. Access the endpoint IP group list page.