H3C Technologies H3C Intelligent Management Center - Manual (Page 478)

460
4. Click OK.
Adding a local online user to the blacklist
The blacklist action does not log off the user immediately. If the RADIUS accounting option is Fully
Supported, logout occurs when the online user and the policy server exchange heartbeat messages. If
the RADIUS accounting option is Partially/Not Supported, the user offline time varies with access device
vendors, as shown in Table 34 .
To add a local online user to the blacklist:
1. Access the local online user list page.
2. On the local online user list, click the Operation icon for an online user, and select Add to
Blacklist from the menu.
A confirmation dialog box appears.
3. Click OK.
Removing a local online user from the blacklist
After blacklisted online users comply with your security policy, remove them from the blacklist.
To remove a local online user from the blacklist:
1. Access the local online user list page.
2. On the local online user list, click the Operation icon for an online user, and select Release
from Blacklist from the expanded menu.
A confirmation dialog box appears.
3. Click OK.
Customizing the local online user list
Customize the online user list to choose the fields to display.
TIP:
To bulk-select multiple fields, press the Ctrl key while you are selecting fields.
To customize the local online user list:
1. Access the local online user list page.
2. On the local online user list, click Customize GUI.
The page displays the following lists:
{
Option List—Contains all fields that can be displayed in the local online user list
{
Output List—Contains all fields that are displayed in the current local online user list.
The top-to-bottom fields in the Output List are ordered from left to right in the local online user list.
3. Perform the following operations as needed:
{
To add fields in the Option List to the Output List, select all desired fields in the Option List and
click the Copy icon .
{
To remove fields from the Output List, select all desired fields from the list and click the Remove
icon .
{
To add all the fields in the Option List to the Output List, click the Copy All icon .
{
To remove all the fields from the Output List, click the Remove All icon .