H3C Technologies H3C Intelligent Management Center - Manual (Page 224)

206
{
Default Online Guests—Enter the default value of Max. Concurrent Logins displayed on the
guest preregistration page.
{
Max. Online Guests—Enter the maximum value that can be specified for Max. Concurrent
Logins on the guest preregistration page.
{
Validate Guest at—Select the time to validate a guest. Options are Specified Time or First Login.
− Specified Time—The guest validity time and expiration time is specified by the guest
manager. If a guest is automatically registered, the valid time is the same as the registration
time.
− First Login—A registered guest becomes valid at first login.
This parameter applies to all guests except those preregistered on the self-service center.
5. Configure the default guest values:
{
Max. Transparent Portal Bindings—Specify the maximum number of endpoints that can be
bound with the same guest account for transparent portal authentication. The value can be an
integer in the range 1 to 5 or Not Supported. Not Supported indicates endpoints cannot be
bound with a guest account for transparent portal authentication. This parameter takes effect
only when the Guest Auto-Registration parameter is enabled on the Guest Parameters page.
{
Default validity period of guests—Specify the default validity period of guests whose expiration
time is not configured or cannot be configured. The validity period of those guests are also
affected by the Maximum Validity Time of Managed Guests parameter of a guest manager. If
the two parameters use different values, the parameter with the smaller value applies to the
guests. For information about configuring the Maximum Validity Time of Managed Guests
parameter, see "
Adding a guest manager ."
{
Guest Password Lifetime—Enter the time period in which a guest password is valid. For example,
if Guest Password Lifetime is 2 days, a password set on 2014-10-10 10:00 will expire on
2014-10-12 10:00. Once the password is expired, the guest cannot access the network. The
value 0 indicates the guest password never expires.
{
Password Generation Rule—Configure the rule to define the type of passwords dynamically
generated by UAM. UAM supports the following password generation rules:
− N Bit Numeric.
− N Bit Letters.
− N Bit Alphanumeric.
N is an integer in the range of 1 to 32. This parameter does not take effect when guests
manually enter passwords for registration.
6. Configure the quick guest creation settings:
{
Guest Lite Registration Verification—Select the method for verifying endpoint users for guest
registration. The value can be:
− Verification Code—The user must enter the verification code generated on the SMS guest
sign-in and authentication page.
− License Code[XXX]—The user must enter the correct license code generated in the brackets
([ ]).
− No Verification—The user does not need to be verified.
Use Verification Code or License Code to prevent malicious registration.
{
Name Generation Rule—Select the rule for UAM to generate guest account names. Options are
Millisecond value for system time, Prefix + millisecond value, and YYMMDDhhmmss + 4-digit