H3C Technologies H3C Intelligent Management Center - Manual (Page 379)

361
{
Account Name—Attribute description used on the LDAP server for user account names. UAM
uses the value of this attribute as the user account name when executing the synchronization
policy.
{
Expiration Time—Attribute description used on the LDAP server for user account expiration time.
UAM uses the value of the attribute as the account expiration time when executing the
synchronization policy. An empty field indicates that the account expiration time is not
synchronized from the LDAP server.
{
Max. Idle Time—Attribute description used on the LDAP server for the maximum idle time a user
is allowed to have. UAM uses the value of this attribute as the maximum idle time settings when
executing the synchronization policy. An empty field indicates that the maximum idle time
settings are not synchronized from the LDAP server.
{
Max. Concurrent Logins—Attribute description used on the LDAP server for the maximum
number of concurrent logins with the same user account. UAM uses the value of this attribute as
the maximum concurrent logins setting when executing the synchronization policy. An empty
field indicates that the maximum concurrent logins settings are not synchronized from the LDAP
server.
{
Login Message—Login message attribute description used on the LDAP server. UAM uses the
value of this attribute as the message displayed at user login when executing the synchronization
policy. An empty field indicates that login messages are not synchronized from the LDAP server.
{
Max. Smart Device Bindings for Portal—Attribute description used on the LDAP server for the
maximum number of device bindings for transparent portal authentication. UAM uses the value
of this attribute as the maximum number of device bindings when executing the synchronization
policy. An empty field indicates that the maximum number of device bindings for transparent
portal authentication is not synchronized from the LDAP server.
Access Device Binding Information area
{
Device IP—Access device IP address attribute description used on the LDAP server. UAM uses the
value of the attribute as the access device IP address when executing the synchronization policy.
An empty field indicates that the device IP addresses are not synchronized from the LDAP server.
{
Port—Access device port attribute description used on the LDAP server. UAM uses the value of
the attribute as the access device port number when executing the synchronization policy. An
empty field indicates that the device port numbers are not synchronized from the LDAP server.
{
VLAN ID/Inner VLAN ID—Attribute description used on the LDAP server for access device VLAN
ID/Inner VLAN ID. UAM uses the value of this attribute as the device VLAN ID/Inner VLAN ID
when executing the synchronization policy. An empty field indicates that the device VLAN
IDs/Inner VLAN IDs are not synchronized from the LDAP server.
{
Outer VLAN ID—Attribute description used on the LDAP server for access device Outer VLAN ID.
UAM uses the value of this attribute as the device Outer VLAN ID when executing the
synchronization policy. An empty field indicates that the device outer VLAN IDs are not
synchronized from the LDAP server.
{
User SSID—Wireless SSID attribute description on the LDAP server. UAM uses the value of this
attribute as the SSID for the wireless user when executing the synchronization policy. An empty
field indicates that the SSIDs are not synchronized from the LDAP server.
{
Device SN—Attribute description used on the LDAP server for the device sequence number. UAM
uses the value of the attribute as the device sequence number when executing the
synchronization policy. An empty field indicates that device sequence numbers are not
synchronized from the LDAP server.
Access Service List contents