H3C Technologies H3C Intelligent Management Center - Manual (Page 290)

272
− Auto Join—Identifies whether the endpoint automatically connects to this SSID for future
wireless connections. This parameter takes effect on the SSID that is first selected by the
endpoint user from the deployed Wi-Fi template.
− Hide Network—Identifies whether the endpoint can access a hidden network whose SSID
broadcasting is disabled or that has no signals.
− Security—Encryption type used for wireless network access. Options are None, WEP,
WPA/WPA2, Any (Personal), and WPA/WPA2 (Enterprise). If the Any (Personal) option is
selected, the endpoint automatically attempts WEP, WPA, and WPA2 for network access.
− Mode—Certificate type used for wireless network access. Options are TLS, TTLS, and PEAP.
This parameter appears only when WPA/WPA2 (Enterprise) is selected for the Security
field.
− HTTP Proxy—HTTP proxy status: None, Manual, or Auto. This field displays None when
HTTP proxy is disabled. This field displays Manual if the endpoint user must configure
parameters for the proxy server in the Wi-Fi template. This field displays Auto if the endpoint
user needs to configure only the URL for the proxy server in the Wi-Fi template.
− Proxy Server's URL—URL of the proxy server. This parameter appears only when Auto is
selected for the HTTP Proxy field.
− Username—Username used to access the proxy server. This parameter appears only when
Manual is selected for the HTTP Proxy field.
− Proxy Server's IP—IP address of the proxy server. This parameter appears only when
Manual is selected for the HTTP Proxy field.
− Proxy Server's Port—Port number of the proxy server. This parameter appears only when
Manual is selected for the HTTP Proxy field.
Wi-Fi Configuration on the Android tab:
− Enable—Identifies whether Wi-Fi is enabled in Android. Other parameters take effect only
when this parameter is selected.
− SSID—SSID to which the endpoint connects.
− Hide Network—Identifies whether the endpoint can access a hidden network whose SSID
broadcasting is disabled or that has no signals.
− Security—Encryption type used for wireless network access. Options are None, WEP,
WPA/WPA2 PSK, and 802.1X EAP.
− EAP Method—Certificate type used for wireless network access. Options are TLS, TTLS, and
PEAP. This parameter appears only when 802.1X EAP is selected for the Security field.
− Phase 2 Authentication—Options are MS-CHAPv2 and GTC. This parameter appears only
when TTLS or PEAP is selected for the EAP Method field.
{
Password Policy
This area appears only in a password policy template.
Password Policy on the iOS/OS X tab:
− Set Screen Lock Password—Identifies whether the screen lock password is set. Other
parameters take effect only when this parameter is selected.
− Allow Simple Value—Identifies whether the password can include characters in
alphabetical order (for example, DEFG) and duplicate characters (for example, 3333).
− Contain Letters and Numbers—Identifies whether the password must include at least one
letter and one digit.
− Minimum Length—Minimum number of characters that the password must contain.