H3C Technologies H3C Intelligent Management Center - Manual (Page 191)

173
• VLAN ID/Inner VLAN ID—Requires the access user's packets carry any of the specified VLAN IDs
or inner VLAN IDs.
• User SSID—Requires the access user connect to the network that uses any of the specified SSIDs.
• Device IP—Requires the access user connect to the access device that uses any of the specified IPv4
addresses. Each entry on the list represents the IPv4 address of an access device bound to the
access user. If a device has multiple IP addresses, use the IPv4 address of the corresponding access
device in UAM.
• Device IPv6 Address—Requires the access user connect to the access device that uses any of the
specified IPv6 addresses. Each entry on the list represents the IPv6 address of an access device
bound to the access user. If a device has multiple IPv6 addresses, use the IPv6 address of the
corresponding access device in UAM. This field appears only when IPv6 is enabled in the UAM
system settings.
Terminal Binding Information area
To pass authentication, the access user must meet all requirements of the access device bindings and
terminal bindings. Empty fields are ignored.
• Computer Name—Requires the access user connect from the specified computer.
• IMSI—Requires the access user's endpoint use the specified IMSI.
• Windows Domain—Requires the access user's endpoint join or log in to the specified domain.
• Terminal IP Address—Requires the access user's endpoint use any of the specified IPv4 addresses
or an IP address in the specified IP address ranges.
• Terminal MAC Address—Requires the access user's endpoint use any of the specified MAC
addresses.
• Terminal IPv6 Address—Requires the access user's endpoint use any of the specified IPv6
addresses. This field appears only when IPv6 is enabled in the UAM system settings.
Action menu
The Action menu is located to the right of the Access Account Info pane, and offers the following actions:
• Refresh—Refresh the detailed information about the access user.
• Modify—Modify the access user. For more information, see " Modifying an ordinary access user ."
• Cancel Account—Delete the access user.
• Add to Blacklist—Add the access user to the blacklist. The link appears only when the access user
is not blacklisted.
• Release from Blacklist—Release the access user from the blacklist. The link appears only when the
access user is blacklisted.
• Authentication Failure Log—View the list of authentication failure logs for the access user. For more
information, see "
Managing authentication failure logs ."
• Authentication Violation Log—View the list of authentication violation logs for the access user. For
more information, see "
Managing authentication violation logs ."
• Access Details—View the list of access details for the access user. For more information, see
"
Managing access detail records ."
• Security Log—View the list of security logs for the access user. This option appears only when EAD
is deployed.
• View Internet Access Audit Logs—View the list of Internet access audit logs for the access user. This
option appears only when EAD is deployed.