H3C Technologies H3C Intelligent Management Center - Manual (Page 285)

267
A confirmation dialog box appears.
4. Click OK.
Clearing endpoint information
Use this function to remove the correlation between the endpoint and endpoint information, including the
vendor, type, and operating system. It does not remove the correlation between the endpoint and access
user account, and does not delete endpoint conflict audit logs for the endpoint. UAM will learn the
endpoint information for correlation.
To clear endpoint information:
1. Access the endpoint list page.
2. In the endpoint list, select one or more endpoints.
3. Click Clear Endpoint Information.
A confirmation dialog box appears.
4. Click OK.
Managing endpoint configurations
Endpoint Configuration Management provides the quick configuration deployment functions for BYOD.
With this function, UAM deploys configurations to endpoints and activates the endpoint configurations.
The BYOD quick deployment process varies with endpoint operating systems.
BYOD quick deployment process for iOS/OS X endpoints
1. The operator creates configuration templates for iOS/OS X endpoints in UAM.
2. The operator creates a configuration distribution policy in UAM to associate the configuration
templates with user groups.
3. The iOS/OS X endpoint user opens the BYOD deployment page (http://ip:port/byod/deploy.jsf)
in Safari, and then clicks Configure My iOS/OS X Device to display the authentication page.
4. The endpoint user enters the correct account name and password on the authentication page.
5. UAM verifies the credentials, locates the configuration distribution policy based on the user group,
and deploys the configuration templates to the iOS/OS X endpoint.
6. The endpoint user manually installs the applicable configuration templates on iOS/OS X.
When the installation is complete, Safari automatically displays an available SSID on a BYOD
deployment result page.
7. The endpoint user selects the SSID for automatic authentication and network access.
BYOD quick deployment process for Android endpoints
1. The operator creates configuration templates for Android endpoints in UAM.
2. The operator creates a configuration distribution policy in UAM to associate the configuration
templates with user groups.