H3C Technologies H3C Intelligent Management Center - Manual (Page 94)

76
Figure 71 Selecting the client certificate
Portal authentication and certificate authentication
To use certificate authentication, you must adjust the configuration for portal authentication and UAM
local authentication as follows.
Importing the root certificate and server certificate to UAM
To enter the page for importing certificates to UAM, click the User tab and select User Access Policy >
Service Parameters > Certificate from the navigation tree, as shown in Figure 72 .
For more configuration information, see " 19 Configuring certificate authentication ."
Figure 72 Entering the certificate configuration page
Enabling certificate authentication when adding an access policy
1. To enter the access policy configuration page, click the User tab and select User Access Policy >
Access Policy from the navigation tree.