Adding accounting roaming configuration, Modifying roaming configuration – H3C Technologies H3C Intelligent Management Center User Manual
Page 433
415
The value must be the same as that in the destination UAM roaming configuration. For more
information about destination UAM roaming configuration, see "
an access device (on the destination UAM)
8.
Select Authentication from the Type list.
9.
Click OK.
Adding accounting roaming configuration
1.
Access the roaming configuration list page.
2.
Click Add.
The page for adding roaming configuration appears.
3.
Select Domain from the Identifier list.
4.
Type a domain name in the Domain name field. If the authentication request of a user contains the
domain name, roaming authentication is performed. Keep the field the same as that in
authentication roaming configuration.
5.
Type the IPv4 address of the destination UAM server in the IP Address field.
6.
Type the listening port number for accounting packets in the Port field.
The values must be the same as that in the destination UAM roaming configuration. For more
information, see "
Configuring the source UAM as an access device (on the destination UAM)
."
7.
Type a key in the Key and Confirm Key fields.
The value must be the same as that in the destination UAM roaming configuration. For more
information about destination UAM roaming configuration, see "
an access device (on the destination UAM)
8.
Select Accounting from the Type list.
9.
Click Add.
Modifying roaming configuration
1.
Access the roaming configuration list page.
2.
Click the Modify icon for the roaming configuration you want to modify.
3.
Select domain from the Identifier list.
4.
Type a domain name in the Domain name field. If the authentication request of a user contains the
domain name, roaming authentication is performed.
5.
Type the IPv4 address of the destination UAM server in the IP Address field.
6.
Type the listening port number for accounting packets in the Port field, based on your selection in
Step 10:
{
If you select Authentication, type the listening port number for authentication packets.
{
If you select Accounting, type the listening port number for accounting packets.
The value must be the same as that in the destination UAM roaming configuration. For more
information about destination UAM roaming configuration, see "
an access device (on the destination UAM)
7.
Type a key in the Key and Confirm Key fields.
The value must be the same as that in the destination UAM roaming configuration. For more
information about destination UAM roaming configuration, see "