H3C Technologies H3C Intelligent Management Center - Manual (Page 288)

270
{
Type—Type of the configuration template, including the SCEP template, general configuration
template, Wi-Fi template, password policy template, mail configuration template, and VPN
configuration template.
{
iOS/OS X—Identifies whether the configuration template is supported by iOS/OS X. The
template is supported if the field displays a Support icon
.
{
Android—Identifies whether the configuration template is supported by Android. The template is
supported if the field displays a Support icon
.
{
Windows—Identifies whether the configuration template is supported by Windows PC. The
template is supported if the field displays a Support icon
.
{
Template Description—Descriptive information about the configuration template.
{
Modify—Click the Modify icon to modify the configuration template.
{
Delete—Click the Delete icon to delete the configuration template.
Querying configuration templates
1. Access the configuration template list page.
2. In the Query Endpoint Configuration Templates area, specify one or more of the following query
criteria:
{
Template Name—Enter a partial or complete template name. UAM supports fuzzy matching for
this field. For example, if you enter test, all templates whose names contain test are queried.
{
Type—Select a template type from the list.
Empty fields are ignored.
3. Click Query.
All matching configuration templates are displayed in the configuration template list.
Click Reset to clear the query criteria and display all configuration templates in the configuration
template list.
Viewing configuration template details
1. Access the configuration template list page.
2. In the configuration template list, click the name of the configuration template you want to view.
The details page contains the following parameters:
{
Basic Information
− Template Name—Name of the configuration template.
− Template Description—Descriptive information about the configuration template.
{
SCEP Configuration
This area appears only in an SCEP template.
− URL—URL of the SCEP server.
− Retry Interval (sec)—Interval between two consecutive certificate applications that are
initiated by the endpoint, in seconds.
− Retry Times—Maximum number of times that the endpoint resends the certificate
application if the server does not respond.
− Key Length—Length of the key used for the certificate application initiated by the endpoint,
which can be 1024 bits or 2048 bits. This parameter has a lower priority than the certificate
server key length. For example, if the certificate server key length is 1024 bits, the key length