H3C Technologies H3C Intelligent Management Center - Manual (Page 297)

279
{
Unlock Without Password—Select the interval in which screen unlock does not require a
password.
{
Max. Unlock Attempts—Select the maximum number of consecutive failed attempts to unlock the
screen. When the maximum number is reached, the endpoint wipes all data and settings. After
six consecutive failed attempts, the endpoint adds a delay before the next attempt. The delay
grows longer after each failed attempt. When the last unlock attempt fails, the endpoint wipes
all data and settings.
6. Click OK.
Adding a password policy template for Android
1. Access the configuration template list page.
2. Click Add Password Policy Template.
The Add Password Policy Template page appears.
3. In the Basic Information area, configure the following parameters:
{
Template Name—Enter a name to uniquely identify the template.
{
Template Description—Enter a description for the template to aid maintenance.
4. Click the Android tab.
5. In the Password Policy area, select Set Screen Lock Password and configure the following
parameters:
{
Contain Letters and Numbers—Select this option if you want the password to include at least
one letter and one digit.
{
Minimum Length—Enter the minimum number of characters that the password must contain.
{
Expiration Date—Enter the lifetime of the password. The password can be changed only before
the expiration date.
{
Max. Password Record—Enter the number of most recent passwords that cannot be used again.
{
Screen Lock Timeout—Enter the maximum idle time before the endpoint locks the screen.
{
Max. Unlock Attempts—Select the maximum number of consecutive failed attempts to unlock the
screen. When the maximum number is reached, the endpoint wipes all data and settings. After
six consecutive failed attempts, the endpoint adds a delay before the next attempt. The delay
grows longer after each failed attempt. When the last unlock attempt fails, the endpoint wipes
all data and settings.
6. Click OK.
Adding a mail configuration template
1. Access the configuration template list page.
2. Click Add Mail Configuration Template.
The Add Mail Configuration Template page appears.
3. Configure the Basic Information area:
{
Template Name—Enter a name to uniquely identify the template.
{
Template Description—Enter a description for the template.
4. Configure the General Information area:
{
Account Description—Enter the account description to be displayed on the iOS/OS X endpoint.
{
Account Type—Select the mail account type. Options are IMAP and POP.