H3C Technologies H3C Intelligent Management Center - Manual (Page 259)

241
field empty. If you keep this field empty, UAM binds an access user account to the sequence
number of the access device used by the user for the first login.
{
VLAN ID/Inner VLAN ID—VLAN ID or inner VLAN ID bound to the access users. This parameter
can be either read from the imported file or manually specified. You can select the specified
column number in the file as the VLAN ID/inner VLAN ID, or select Not Imported and enter a
VLAN ID/inner VLAN ID. The VLAN ID/ inner VLAN ID you enter applies to all imported access
users.
{
Outer VLAN ID—Outer VLAN ID bound to the access users. This parameter can be either read
from the imported file or manually specified. You can select the specified column number in the
file as the outer VLAN ID, or select Not Imported and enter an outer VLAN ID. The outer VLAN
ID you enter applies to all imported access users.
{
User SSID—SSID used by the access users for wireless access. To pass authentication, an access
user must use the specified SSID. This parameter can be either read from the imported file or
manually specified. You can select the specified column number in the file as the SSID, or select
Not Imported and enter an SSID. The SSID you enter applies to all imported access users.
Terminal Binding Information
The binding parameters in this area take effect only when they are selected in the Authentication
Binding Information area of the selected services. For example, the Computer Name parameter is
effective to the services with the Bind Computer Name option selected.
If you select a binding option for a service but do not specify a value for the parameter in the
access device binding information, UAM automatically acquires the binding information for the
service when each user first passes authentication.
To pass authentication, the user must meet all requirements of the access device bindings and
terminal bindings.
{
Computer Name—Computer name bound to the access users. To pass authentication, an access
user must access from the specified computer. This parameter must be read from the imported file,
because access users are not bound to the same computer name. Select the specified column
number in the file as the computer name.
{
Windows Domain—Domain name bound to the access users. To pass authentication, an access
user must join or log in the specified domain. This parameter can be either read from the
imported file or manually specified. You can select the specified column number in the file as the
domain name, or select Not Imported and enter a domain name. The domain name you enter
applies to all imported access users.
{
Terminal IP Address—List of IPv4 addresses or IPv4 address ranges bound to the access users.
To pass authentication, an access user must use a bound IPv4 address or an IPv4 address in the
bound IPv4 address ranges. This parameter must be read from the imported file, because access
users are not bound to the same IPv4 address. Select the specified column number in the file as
the bound IPv4 addresses or bound IPv4 address ranges.
{
Terminal IPv6 Address—List of IPv6 addresses bound to the access users. To pass authentication,
an access user must use an IPv6 address on the list. This parameter must be read from the
imported file, because access users are not bound to the same IPv6 address. Select the specified
column number in the file as the bound IPv6 addresses.
{
Terminal MAC Address—List of MAC addresses bound to the access users. To pass
authentication, an access user must use a MAC address on the list. This parameter must be read
from the imported file, because access users are not bound to the same MAC address. Select the
specified column number in the file as the bound MAC addresses.