Lenze 8400 TopLine - Manual (Page 1021)

Lenze · 8400 TopLine · Reference manual · DMS 6.0 EN · 06/2014 · TD05/TD14
1021
17 Parameter reference
17.2 Parameter list | C00603
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C00603
C00604
Parameter | Name:
C00603 | Resp. to feedback
Data type: UNSIGNED_8
Index: 23972
d
= 5DA4
h
Response of different monitoring modes for the encoder/feedback system
 Encoder/feedback system
Selection list
0 No Reaction
1 Fault
2 Trouble
3 TroubleQuickStop
4 WarningLocked
5 Warning
6 Information
Subcodes Lenze setting Info
C00603/1 1: Fault Resp. to MultiEncoder open circuit
C00603/2 1: Fault Resp. to resolver open circuit
C00603/3 0: No Reaction Up to and including version 02.xx.xx:
Resp. to encoder communication error
From version 12.00.00:
Resp. to encoder angular drift monitoring
C00603/4 1: Fault Up to and including version 02.xx.xx:
Resp. to encoder angular drift monitoring
From version 12.00.00:
Resp. to encoder communication error
C00603/5 6: Information Resp. to Hiperface status
• From version 14.00.00
C00603/6 6: Information Resp. to invalid Hiperface position
• From version 14.00.00
C00603/7 6: Information Resp. to SinCos inaccuracy
• From version 14.00.00
C00603/8 1: Fault Resp. to Hiperface sin/cos deviation
• From version 15.00.00
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C00604 | Resp. to device overload (Ixt)
Data type: UNSIGNED_8
Index: 23971
d
= 5DA3
h
Response if the adjustable device utilisation threshold ( C00123 ) is reached.
• The current device utilisation is displayed in C00064 .
Selection list (Lenze setting printed in bold)
0 No Reaction
1 Fault
5 Warning
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1