Lenze 8400 TopLine - Manual (Page 1687)

Lenze · 8400 TopLine · Reference manual · DMS 6.0 EN · 06/2014 · TD05/TD14
1687
19 Function library
19.1 Function blocks
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C01157/1...16 0.0000 units 214748.0000 Position switch point positions
• Lenze setting: 0.0000 units
dnSwitchPointx_p = position of the first switching point for position switch point x.
dn2ndPoint_Sizex_p = position of the second switching point or size of the
switching window for position switch point x, depending on the CenterMode set in
C01154/x :
• When CenterMode = FALSE: Position of the second switching point
• dn2ndPoint_Sizex_p must be higher than dnSwitchPointx_p.
• When CenterMode = TRUE: Size of the switching window
• Due to the symmetrical arrangement of the window around the first switching
point, uneven values are rounded to even values.
• Only positive values are permissible.
C01158/1 Setting is bit coded: Inversion of outputs
• Lenze setting: 0x0000
Bit 0 Inversion of output 1
Bit 1 Inversion of output 2
Bit 2 Inversion of output 3
Bit 3 Inversion of output 4
Bit 4 Inversion of output 5
Bit 5 Inversion of output 6
Bit 6 Inversion of output 7
Bit 7 Inversion of output 8
Bit 8 Reserved
...
Bit 15

For a detailed functional description see L_SwitchPoint_1 .
Parameter Possible settings Info