Lenze 8400 TopLine - Manual (Page 345)

Lenze · 8400 TopLine · Reference manual · DMS 6.0 EN · 06/2014 · TD05/TD14
345
6 Encoder/feedback system
6.3 Multi-Encoder (X8)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
6.3.4 Digital frequency coupling
This function extension is available from version 12.00.00!
The multi-encoder interface (X8) can also be reconfigured for the output of encoder signals with TTL
level (0 ... 500 kHz) in order to realise a "digital frequency coupling".
• The "digital frequency coupling" term describes a digital setpoint transmission and evaluation
path between a setpoint source and one or several controllers.
Parameterisation dialog (cutout)
Further parameterisation dialogs:  Scaling of position value

Note!
When the digital frequency coupling is used, the multi-encoder interface is not available
anymore for further encoder functions! Only encoder signals with TTL level are
permissible as input signals at X8!
Parameter Info Lenze setting
Value Unit
C00422 LS_MultiEncoder: Encoder type 0: Incremental encoder (TTL)
C00421 LS_MultiEncoder: Supply voltage 5.0 V
C00420/3 LS_MultiEncoder: Encoder increment 512 Incr./rev.
C00497/3 LS_MultiEncoder: Encoder filter time 1.0 ms
C01112/1 LS_MultiEncoder: Position offset 0.0000 units
C00030/1 LS_DFOut: number of increments 2048
C00540 LS_DFOut: Function 2: DFIn