1 incremental ttl and sincos encoder, Incremental ttl and sincos encoder, 6encoder/feedback system – Lenze 8400 TopLine User Manual
Page 326
6
Encoder/feedback system
6.3
Multi-Encoder (X8)
326
Lenze · 8400 TopLine · Reference manual · DMS 6.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
6.3.1
Incremental TTL and SinCos encoder
Tip!
The use of a SinCos encoder instead of a TTL encoder enables a fine interpolation of the
position within one encoder increment due to the analog representation of the track
signals A and B. This serves to considerably increase the resolution of the position
information of a SinCos encoder compared to a conventional TTL incremental encoder.
Parameterisation dialog (cutout)
Further parameterisation dialogs:
Parameter
Info
Lenze setting
Value Unit
LS_MultiEncoder: Encoder type
0: Incremental encoder (TTL)
LS_MultiEncoder: Supply voltage
5.0 V
LS_MultiEncoder: Encoder increment
512 Incr./rev.
LS_MultiEncoder: Encoder filter time
1.0 ms
LS_MultiEncoder: Position offset
0.0000 units