10 diagnostics & error management – Lenze 8400 TopLine User Manual
Page 677
Lenze · 8400 TopLine · Reference manual · DMS 6.0 EN · 06/2014 · TD05/TD14
677
10
Diagnostics & error management
10.3
Drive diagnostics with the »Engineer«
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
How to diagnose a drive with the »Engineer«:
1. In the Project view, select the 8400 TopLine controller.
2. Click the
icon or select the OnlineGo online command to build up an online
connection with the controller.
3. Select the Diagnostics tab.
• With an online connection, the Diagnostics tab displays current status information
about the controller.
Tip!
The online connection to the controller can be established via the following device
interfaces:
• CAN interface X1
Diagnostics via the
• X6 diagnostic interface
We recommend this diagnostic connection when the X1 CAN interface is used for
process communication.