Lenze 8400 TopLine - Manual (Page 1360)

18 Working with the FB Editor
18.4 Reconfiguring the predefined interconnection
1360
Lenze · 8400 TopLine · Reference manual · DMS 6.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
18.4.2 Changing connector visibilities
Inputs and outputs that are not connected can be hidden for each block. This serves to reduce the
dimension of the block. The interconnection becomes clearer.

How to define the visible inputs and outputs:
1. Go to the context menu of the block and select the Connector visibilities command.
• The Define Visible Inputs and Outputs for Function Blocks is displayed:
• All visible connections have a checkmark.
• In case of a block that is inserted anew, all inputs and outputs are visible at first.
• Inputs and outputs with a light grey checkbox are already connected and thus cannot be
hidden.
2. By setting/removing the checkmarks or via the buttons you can define the visible inputs
and outputs.
3. Press OK to accept the selected definition and close the dialog box.