Lenze 8400 TopLine - Manual (Page 348)

6 Encoder/feedback system
6.3 Multi-Encoder (X8)
348
Lenze · 8400 TopLine · Reference manual · DMS 6.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
6.3.4.2 Internal interfaces | System block "LS_DFOut"
The LS_DFOut system block maps the digital frequency output in the FB Editor:
Inputs
Outputs
Identifier
Data type
Information/possible settings
nOut_v
INT
Speed in [increments/ms] from the application which is to be output via the digital
frequency output X8 in the form of encoder signals with TTL levels.
• Scaling: 16384 ≡ 15000 rpm
• For selecting this signal source, C00540 must be set to "7: AFB input".
Identifier
Data type
Value/meaning
nIn_v
INT
Speed in [increments/ms] that has been detected via the digital frequency input X8
in the form of encoder signals with TTL levels.
• Scaling: 16384 ≡ 15000 rpm
/6B')2XW
Q,QBY Q2XWBY
;

 
& ,QFUHPHQW
&
)XQFWLRQ