Lenze 8400 TopLine - Manual (Page 1655)

Lenze · 8400 TopLine · Reference manual · DMS 6.0 EN · 06/2014 · TD05/TD14
1655
19 Function library
19.1 Function blocks
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
19.1.158.5 Action type "Program end"
In order to define the program end within the sequence table, an action of "program end" type is
available.
Action call (entry in the sequence table)
(Leading zeros can be omitted.)
• When the bStart input is reset to FALSE while the positioning program is running, processing is
only continued until program end is reached.
• In the Lenze setting, all entries of the sequence table are set to "0" and thus to "program end".
End
0