19 function library – Lenze 8400 TopLine User Manual
Page 1385
Lenze · 8400 TopLine · Reference manual · DMS 6.0 EN · 06/2014 · TD05/TD14
1385
19
Function library
19.1
Function blocks
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Related topics:
Overview of system blocks available
3 μs
... serves to output binary output signals of other FBs, SBs or LAs.
2 μs
... switches between two input signals of the "WORD" data type.
2 μs
... .switches between two input signals of "DINT" data type.
•
These FBs are available from version 02.00.00.
3 μs
... outputs the square root for a DINT input value.
2 μs
... is a ramp function generator with S-shaped ramps for limiting the
temporal rise of analog signals.
3 μs
... provides position switch points, i.e. digital switches the binary
statuses (FALSE/TRUE) of which depend on the actual position.
• The position switch point positions can be set via FB inputs.
•
This FB is available from version 02.00.00.
3 μs
... provides position switch points, i.e. digital switches the binary
statuses (FALSE/TRUE) of which depend on the actual position.
• The position switch point positions can be set via parameters.
•
This FB is available from version 12.00.00.
3 μs
... evaluates digital signal edges and converts them into timed pulses.
Function block
Runtime Function