6 ls_axisbusout, 7 ls_canmanagement, 8 ls_dataaccess – Lenze 8400 TopLine User Manual
Page 1701: 9 ls_devicemonitor, 10 ls_dfout, Ls_axisbusout 1, Ls_canmanagement 1, Ls_dataaccess 1, Ls_devicemonitor 1, 10 ls_dfout 1
Lenze · 8400 TopLine · Reference manual · DMS 6.0 EN · 06/2014 · TD05/TD14
1701
19
Function library
19.2
System blocks
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
19.2.6
LS_AxisBusOut
Interface to the axis bus.
19.2.7
LS_CANManagement
Control of internal functions of the CAN driver and display of the "Operational" status as well as the
node address.
19.2.8
LS_DataAccess
Only for Lenze-internal use.
19.2.9
LS_DeviceMonitor
Motor control status signals.
19.2.10
LS_DFOut
Interface to the digital frequency output (multi-encoder interface X8).
For a detailed description see main chapter "Axis bus":
Internal interfaces | System block "LS_AxisBusOut"
For a detailed description see the main chapter "System bus CAN on board":
Internal interfaces | System block "LS_CANManagement"
For a detailed description see the main chapter "Motor control (MCTRL)":
Internal status signals | System block "LS_DeviceMonitor"
For a detailed description see main chapter "Encoder-/feedback system":