Lenze 8400 TopLine - Manual (Page 1159)

Lenze · 8400 TopLine · Reference manual · DMS 6.0 EN · 06/2014 · TD05/TD14
1159
17 Parameter reference
17.2 Parameter list | C01089
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C01089
C01090
Parameter | Name:
C01089 | LS_WriteParamList: WriteValue_4
Data type: INTEGER_32
Index: 23486
d
= 5BBE
h
Parameter change-over : Parameter values - value set 4
Setting range (min. value | unit | max. value)
-2147483647 2147483647
Subcodes Lenze setting Info
C01089/1 0 Parameter values - value set 4
• Parameter values for the parameters defined in
C01085 /1 ... 32.
C01089/...
C01089/32
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C01090 | LS_ParReadWrite 1-6: Index
Data type: INTEGER_32
Index: 23485
d
= 5BBD
h
Parameter to be read or written.
• Format: <code number>,<subcode number>
• For a setting of "0,000", inputs wParIndex and wParSubindex are effective for addressing purposes instead.
Setting range
(min. value | unit | max. value)
0.000 16000.000
Subcodes Lenze setting Info
C01090/1 0.000 LS_ParReadWrite_1 : Index
C01090/2 0.000 LS_ParReadWrite_2 : Index
C01090/3 0.000 LS_ParReadWrite_3 : Index
C01090/4 0.000 LS_ParReadWrite_4 : Index
C01090/5 0.000 LS_ParReadWrite_5 : Index
C01090/6 0.000 LS_ParReadWrite_6 : Index
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1000