Lenze 8400 TopLine - Manual (Page 672)

9 Basic drive functions (MCK)
9.12 Holding brake control
672
Lenze · 8400 TopLine · Reference manual · DMS 6.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Selection of the feedforward control value
The feedforward control value can be selected via bit 4 in
C02582 :
• Bit 4 = 0: Automatic selection
• The torque saved at the last stop is used.
• Bit 4 = 1: Manual selection
• bMBrakeStartValue2 = FALSE: The feedforward control value 1 set in C02581/4 is used.
• bMBrakeStartValue2 = TRUE: The feedforward control value set in C02581/5 is used.
Additive torque
If the servo control (SC) operating mode has been selected, an additive torque value in [%] can be
selected via the nBrkTorqueAdd_a input.
Related topics:
 Functional settings ( 661)
 Switching thresholds ( 662)