3commissioning – Lenze 8400 TopLine User Manual
Page 75
Lenze · 8400 TopLine · Reference manual · DMS 6.0 EN · 06/2014 · TD05/TD14
75
3
Commissioning
3.8
Commissioning of the "Table positioning" technology application
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
The Encoder/Feedback system parameterisation dialog will be shown:
3. In the Position encoder selection list field (
), select "Encoder signal FreqIn12".
4. In the Fct. DI 1/2 100kHz list field (
), select "DI1(6)&DI2(7)=FreqIn (2-track)".
This selection ensures that the digital DI1 and DI2 input terminals are configured as frequency
inputs.
5. Set the number of position encoder increments in the Number of encoder increments at
FreqIn12 input field (
).
6. Click the Close button to close the parameterisation dialog again.
Related topics:
Using DI1(6) and DI2(7) as frequency inputs