Lenze 8400 TopLine - Manual (Page 1720)

19 Function library
19.2 System blocks
1720
Lenze · 8400 TopLine · Reference manual · DMS 6.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
19.2.33 LS_ParFreeUnit_2
This system block outputs 16 parameterisable position signals.
• In contrast to the SB LS_ParFree_p , the positions are set in the application unit [unit] instead of
in [increments].
• The bDataValid status signal indicates that the internal position conversion is completed and
the output data are consistent.
Outputs
Parameter
Identifier
Data type
Value/meaning
bDataValid
BOOL
Status signal "Position conversion completed, data consistent"
TRUE The conversion of the positions from [unit] to [increments] is
completed.
dnC475_17 ... dnC475_32
DINT
Output of the position signals parameterised in C00475/17...32 in [increments]
• Observe bDataValid status signal!
Parameter Possible settings Info
C00475/17...32 -214748.3647 unit 214748.3647 Setting of the position signals to be
output
GQ&B
GQ&B
GQ&B
GQ&B
GQ&B
&
&
&
&
&
/6B3DU)UHH8QLWB
E'DWD9DOLG