Lenze 8400 TopLine - Manual (Page 373)

Lenze · 8400 TopLine · Reference manual · DMS 6.0 EN · 06/2014 · TD05/TD14
373
6 Encoder/feedback system
6.7 Monitoring
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
6.7.5 Motor temperature monitoring (KTY)
The motor temperature can also be detected and monitored via the resolver cable and/or the
encoder cable.
• The feedback system to be used for the motor temperature is selected in C01193 .
• The respective motor temperature monitoring includes an early warning stage as well as an
open-circuit monitoring for the thermal sensor.
Parameterisation dialog (cutout)

Note!
In the Lenze setting of C00583/1...6 , the motor temperature monitoring functions are
switched on! These monitoring functions are only active with speed encoder selection
"3: Multi encoder" or "4: Resolver" in C00495 .
From version V02.00.00 with servo control (SC), the temperature compensation within
the motor control is activated in the Lenze setting of C02878/1 . However, temperature
compensation is only active with speed sensor selection "3: Multi encoder" or
"4: Resolver" in C00495 as well as error-free KTY temperature detection (display in
C00063/1 ≠ 255 °C).