Lenze 8400 TopLine - Manual (Page 1516)

19 Function library
19.1 Function blocks
1516
Lenze · 8400 TopLine · Reference manual · DMS 6.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
19.1.82 L_DigitalLogic_2
This FB provides a binary output signal created by a logic operation of the input signals. Optionally,
one of the constant binary values independent from the input signals can be output.
• Output of a constant binary value
• AND operation of the inputs
• OR operation of the inputs
• Output depending on the combination of the input signals
Inputs
Outputs
Parameter
Identifier
Data type
Information/possible settings
bIn1
BOOL
Input signal 1
bIn2
BOOL
Input signal 2
bIn3
BOOL
Input signal 3
Identifier
Data type
Value/meaning
bOut
BOOL
Output signal
Parameter Possible settings Info
C00822 Function selection
0 "0" Constant value "FALSE"
1 "1" Constant value "TRUE"
2 AND operation
3 OR operation
4 bOut = f (truth table) The output value depends on the
truth table parameterised in
C00823/1...8
/B'LJLWDO/RJLFB


!
  
  












E2XW
&
&
&
&
&
E,Q
E,Q
E,Q
bOut bIn1 bIn2 bIn3 ∧ ∧
=
bOut bIn1 bIn2 bIn3 ∨ ∨ =