Lenze 8400 TopLine - Manual (Page 1164)

17 Parameter reference
17.2 Parameter list | C01110
1164
Lenze · 8400 TopLine · Reference manual · DMS 6.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C01110
C01111
C01112
Parameter | Name:
C01110 | LS_MultiEncoder: Solid measure
Data type: UNSIGNED_8
Index: 23465
d
= 5BA9
h
From version 02.00.00
Configuration examples can be found in the following chapters:
• SinCos absolute value encoder with HIPERFACE® protocol
• SSI absolute value encoder with Stegmann-SSI protocol
Selection list (Lenze setting printed in bold) Info
0 rotatively unipolar
1 linearly unipolar
2 rotatively bipolar
3 linearly bipolar
4 Inverted rotatively in unipolar mode
From version 15.00.00
5 Inverted linearly in unipolar mode
6 Inverted rotatively in bipolar mode
From version 15.00.00
7 Inverted linearly in bipolar mode From version 15.00.00
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C01111 | LS_MultiEncoder: Encoder constant
Data type: INTEGER_32
Index: 23464
d
= 5BA8
h
From version 02.00.00
Configuration examples can be found in the following chapters:
• SinCos absolute value encoder with HIPERFACE® protocol
• SSI absolute value encoder with Stegmann-SSI protocol
Setting range (min. value | unit | max. value)
1 2147483647
Subcodes Lenze setting Info
C01111/1 1 LS_MultiEncoder : Difference - traverse path
C01111/2 1 LS_MultiEncoder : Difference - encoder value
C01111/3 1 LS_MultiEncoder : Traverse path - encoder increment
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C01112 | LS_MultiEncoder: Position values
Data type: INTEGER_32
Index: 23463
d
= 5BA7
h
 Encoder/feedback system: Multi-Encoder
Setting range (min. value | unit | max. value)
-214748.3647 units 214748.3647
Subcodes Lenze setting Info
C01112/1 0.0000 units LS_MultiEncoder : Position offset
C01112/2 -214748.3647 units LS_MultiEncoder : Data area min
C01112/3 214748.3647 units LS_MultiEncoder : Data area max
C01112/4 0.0000 units LS_MultiEncoder : Max. position jump
• From version 14.00.00
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 10000