2 resetting servo alarms – Yaskawa DR2 Sigma Servo User Manual
Page 184
Advertising
4.1 Basic Operations
171
4.1.2 Resetting Servo Alarms
Servo alarms can be reset using the Digital Operator. (Servo alarms can also be reset by the
1CN-44, ALMRST input signal. Refer to 3.7.1 for details.)
Press
Alarm Reset
NOTE
After an alarm occurs, remove the cause of the alarm before resetting it. Refer to Section
6.2 Troubleshooting to determine and remedy the cause of an alarm.
4
Advertising
This manual is related to the following products: