Yaskawa DR2 Sigma Servo - Manual (Page 363)

5.6 Specifications and Dimensional Drawings of Peripheral Devices
351
S For 100VAC Class
Servopack Type
DR2-
Applicable
Servomotor
Power supply
capacity per
Servopack *1
MCCB or
fuse
capacity *2
Noise filter
type
(reference
Recommended noise
filter *3
Power
ON/OFF
switch Servopack *1
kVA
capacity *2
A
(reference
diagram) Type Spec.
switch
30 W
(0 04HP)
A3BC SGM−A3B j 0.25 5 Applicable LF- 205A Single-phase
200 VAC
Contactor
35A (0.04HP)
SGM−A3W j
pp g p
200 VAC
Class, 5 A
35A or
above
50 W
(0 07HP)
A5BC SGM−A5B j 0.3
Class, 5 A above
(0.07HP)
SGM−A5W j
100 W
(0.13HP)
01BC SGM−01B j
SGM−01W j 0.5
Not
applicable
01BCP SGMP−01B j
SGMP−01W j
applicable
200 W
(0.27HP)
02BC SGM−02B j
SGM−02W j 0.75 8 LF- 210 Single-phase
200 VAC
Class 10 A
02BCP SGMP−02B j
SGMP−02W j
Class, 10 A
300 W
(0.40HP)
03BC SGM−03B j
SGM−03W j 1.4 15 LF- 220 Single-phase
200 VAC
Class 20 A
03BCP SGMP−03B j
SGMP−03W j
Class, 20 A
Note For power ON/OFF switch, use contactor 30A or above.
*1 Value at rated load.
*2 Braking characteristics (at 25_C): 200% for 2s min., 700% for 0.01s min.
*3 Yaskawa recommends noise filters manufactured by Tokin Corp.
Yaskawa Controls Co., Ltd. can supply these noise filters.
The types of cable are shown in the table below. Use it in combination with the table
above.
Cable Type Conductor Allowable Temperature
C
Symbol Name
p
_ C
PVC Normal vinyl cable ---
IV 600 V vinyl cable 60
HIV Temperature-resistant vinyl cable 75
Note 1) Use cable with 600 V min. withstand voltage for main circuits.
2) Consider allowable current reduction ratio if cables are bundled in PVC or metal ducts.
3) Use temperature-resistant cable under high ambient or panel temperature where nor-
mal vinyl cables rapidly deteriorate.
5