Arp arpa – ADTRAN 1000R Series User Manual
Page 1014
Advertising
![background image](/manuals/36101/1014/background.png)
Command Reference Guide
Port Channel Interface Config Command Set
61200510L1-35E
Copyright © 2005 ADTRAN
1014
arp arpa
Use the arp arpa command to enable address resolution protocol (ARP) on this interface.
Syntax Description
arpa
Keyword used to set standard address resolution protocol for this interface.
Default Values
The default for this command is arpa.
Applicable Platforms
This command applies to the NetVanta 300, 1000, and 1000R Series units.
Command History
Release 5.1
Command was introduced.
Usage Examples
The following example enables standard ARP for the Port Channel interface:
(config)#interface port-channel 1
(config-p-chan 1)#arp arpa
Advertising