ADTRAN 1000R Series - Manual (Page 1335)

Command Reference Guide DHCP Pool Command Set
61200510L1-35E Copyright © 2005 ADTRAN 1335
Default Values
By default, the hardware address type is set to 10 Mbps Ethernet.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 2.1 Command was introduced.
Usage Examples
The following example specifies an Ethernet client with a MAC address of ae:11:54:60:99:10:
(config)#ip dhcp-server pool MyPool
(config-dhcp)#hardware-address ae:11:54:60:99:10 Ethernet