ADTRAN 1000R Series - Manual (Page 555)

Command Reference Guide Line (Telnet) Interface Config Command Set
61200510L1-35E Copyright © 2005 ADTRAN 555
accounting commands [<level> l <name> l default]
Use the accounting commands command to assign AAA accounting methods to lines. You must first turn
AAA on for this command to become available.
Syntax Description
<level> Specifies a command level (1 or 15).
<name> Applies a named accounting method to this line.
default Applies the default accounting method to a line.
Default Values
The default for this command is off.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 11.1 Command was introduced.
Usage Examples
The following example applies the default accounting method to Telnet session 1:
(config)#aaa on
(config)#line telnet 1
(config-telnet1)#accounting commands 1 default