ADTRAN 1000R Series - Manual (Page 279)

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 279
show queuing [fair]
Use the show queuing command to display information associated with configured queuing methods.
Syntax Description
fair Optional. Displays only information on the weighted fair queuing configuration.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 5.1 Command was introduced.
Usage Examples
The following is a sample output from the show queuing command:
>enable
#show queuing
Interface Discard threshold Conversation subqueues
fr 1 64 256
fr 2 64 256
ppp 1 64 256