ADTRAN 1000R Series - Manual (Page 1225)

Command Reference Guide CA Profile Configuration Command Set
61200510L1-35E Copyright © 2005 ADTRAN 1225
subject-name <name>
Use the subject-name command to specify the subject name used in the certificate request.
Syntax Description
<name> Specifies a subject name string using up to 256 characters entered in X.500 LDAP
format.
Default Values
By default, there is no subject name configured.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 5.1 Command was introduced.
Functional Notes
Configuring this setting simplifies the crypto ca enroll dialog, allowing you to enter the subject name only
once rather than every time you go through the enrollment process. Refer to
crypto ca enroll <name> on
page 361 .
Usage Examples
The following example assigns a subject name of Adtran-cert to certificate requests:
(ca-profile)#subject-name Adtran-cert