Spanning-tree bpduguard [enable | disable – ADTRAN 1000R Series User Manual
Page 777
![background image](/manuals/36101/777/background.png)
Command Reference Guide
ATM Sub-Interface Config Command Set
61200510L1-35E
Copyright © 2005 ADTRAN
777
spanning-tree bpduguard [enable | disable]
Use the spanning-tree bpduguard command to block BPDUs from being received on this interface. To
return to the default value, use the no form of this command.
Syntax Description
enable
Enables the BPDU block.
disable
Disables the BPDU block.
Default Values
By default, this command is set to disable.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 3000, and 4000 Series units.
Command History
Release 5.1
Command was introduced.
Release 8.1
ATM sub-interface was added.
Usage Examples
The following example enables the bpduguard on the interface:
(config)#interface atm 1.1
(config-atm 1.1)#spanning-tree bpduguard enable