Dial-backup auto-backup – ADTRAN 1000R Series User Manual
Page 1047
Command Reference Guide
PPP Interface Configuration Command Set
61200510L1-35E
Copyright © 2005 ADTRAN
1047
dial-backup auto-backup
Use the dial-backup auto-backup command to configure the PPP interface to automatically attempt a
dial-backup upon failure. For more detailed information on PPP dial-backup functionality, refer to the
Functional Notes and Technology Review sections of dial-backup call-mode [answer | answer-always |
originate | originate-answer | originate-answer-always]
Syntax Description
No subcommands.
Default Values
By default, all backup endpoints will automatically attempt dial-backup upon a failure.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 1.1
Command was introduced.
Release 5.1
Command was expanded to include the PPP interface.
Usage Examples
The following example enables automatic dial-backup on the endpoint:
(config)#interface ppp 1
(config-ppp 1)#dial-backup auto-backup