ADTRAN 1000R Series - Manual (Page 1300)

Command Reference Guide Community List Command Set
61200510L1-35E Copyright © 2005 ADTRAN 1300
permit
Use the permit command to allow a BGP route that matches the community numbers.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 9.3 Command was introduced.
Usage Examples
The following example permits BGP routes that match the community numbers:
(config)#ip as-path-list listname
(config-comm-list)#permit