ADTRAN 1000R Series - Manual (Page 762)

Command Reference Guide ATM Sub-Interface Config Command Set
61200510L1-35E Copyright © 2005 ADTRAN 762
ip ospf authentication [message-digest | null]
Use the ip ospf authentication command to authenticate an interface that is performing OSPF
authentication.
Syntax Description
message-digest Optional. Specifies message-digest authentication type.
null Optional. Specifies that no authentication be used.
Default Values
By default, this is set to null (meaning no authentication is used).
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 3000, and 4000 Series units.
Command History
Release 3.1 Command was introduced.
Release 8.1 ATM sub-interface was added.
Usage Examples
The following example specifies that no authentication will be used on the ATM sub-interface 1.1:
(config)#interface atm 1.1
(config-atm 1.1)#ip ospf authentication null