Dial-backup priority <value – ADTRAN 1000R Series User Manual

Page 883

Advertising
background image

Command Reference Guide

Frame Relay Sub-Interface Config Command Set

61200510L1-35E

Copyright © 2005 ADTRAN

883

dial-backup priority <value>

Use the dial-backup priority command to select the backup priority for this interface. This command
allows the user to establish the highest priority backup link and ensure that link will override backups
attempted by lower priority links. Use the no form of this command to return to the default value. For more
detailed information on Frame Relay dial-backup functionality, refer to the Functional Notes and
Technology Review sections of the command dial-backup call-mode [answer | answer-always | originate |
originate-answer | originate-answer-always]

on page 876

.

Syntax Description

<value>

Sets the relative priority of this link (valid range: 0 to 100). A value of 100
designates the highest priority.

Default Values

By default, dial-backup priority is set to 50.

Applicable Platforms

This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.

Command History

Release 1.1

Command was introduced.

Usage Examples

The following example assigns the highest priority to this endpoint:

(config)#interface frame-relay 1.16

(config-fr 1.16)#dial-backup priority 100

Advertising