ADTRAN 1000R Series - Manual (Page 63)

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 63
clear ip prefix-list <listname>
Use the clear ip prefix-list command to clear the IP prefix list hit count shown in the show ip prefix-list
detail command output. Refer to show ip prefix-list [detail | summary] <listname>
on page 237 for more
information.
Syntax Description
<listname> Specifies hit count statistics of the IP prefix list to clear.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 8.1 Command was introduced.
Usage Examples
The following example clears the hit count statistics for prefix list test:
>enable
#clear ip prefix-list test